夹竹桃花挥发油的GC-MS分析及β-葡萄糖苷酶对夹竹桃花的增香和豚鼠离体子宫平滑肌的作用

目的:建立夹竹桃花挥发油GC-MS的色谱分离鉴定方法,分析夹竹桃花挥发油的化学成分和对豚鼠离体子宫平滑肌的作用。方法:采用挥发油提取器提取夹竹桃花挥发油,以GC-MS法进行分析鉴定,建立了豚鼠离体子宫模型。结果:分别从无酶和有酶的夹竹桃花挥发油提取物中确证了58和57个化合物,挥发油对豚鼠离体子宫平滑肌有收缩作用。结论:对夹竹桃的挥发油化学成分进行了比较分析结果表明,β-葡萄糖苷酶对夹竹桃花有较弱增香作用,也能增加豚鼠离体子宫平滑肌收缩。     

不同类型水稻品种产量和氮素吸收利用对大气CO2浓度升高响应的差异

目的 探明不同类型水稻品种产量和氮素吸收利用对FACE(大气CO₂浓度增高)响应的差异。方法 以常规粳稻、杂交籼稻、常规籼稻共6个品种为供试材料,研究FACE对不同类型水稻产量、氮素吸收利用的影响。结果 1）FACE处理极显著提高了水稻产量,平均增加24.17%, 常规籼稻增幅最大,FACE和对照均以杂交籼稻最高;2）FACE处理显著增加了单位面积穗数,常规粳稻增幅最大,并显著增加了杂交籼稻和常规籼稻每穗粒数;3）FACE处理显著提高了成熟期吸氮量和氮素籽粒生产效率,成熟期吸氮量平均增加21.23%,杂交籼稻增幅最大, FACE和对照均以常规籼稻最高;氮素籽粒生产效率平均增加7.33%,杂交籼稻增幅最大,FACE和对照均以杂交籼稻最高。成熟期吸氮量对产量促进作用略大于成熟期氮素籽粒生产效率;4）FACE处理降低了植株含氮率,成熟期平均下降0.105个百分点,常规粳稻降幅最大。FACE处理极显著提高植株干物质量,成熟期平均增加23.95%,常规籼稻增幅最大;FACE处理显著提高常规籼稻和杂交籼稻成熟期单穗吸氮量,分别增加10.79%、13.93%,但常规粳稻下降了9.60%;FACE处理显著提高了成熟期群体吸氮强度,平均增加22.29%,杂交籼稻增幅最大。FACE处理对水稻全生育期天数无显著影响;FACE处理显著提高茎鞘、叶片、穗各器官吸氮量,叶片增幅最大,平均增加51.86%,杂交籼稻增幅最大;FACE处理显著提高了不同生育阶段吸氮量,抽穗-成熟阶段增幅最大,平均增加108.90%,杂交籼稻增幅最大;5）植株干物质量、单穗吸氮量、吸氮强度、穗吸氮量、抽穗-成熟阶段吸氮量对成熟期总吸氮量的促进作用分别大于植株含氮率、单位面积穗数、生育天数、茎鞘叶吸氮量、移栽-分蘖和分蘖-抽穗阶段吸氮量;6）FACE处理显著提高了氮肥偏生产力,降低了每百千克籽粒需氮量,前者平均增加24.16%,常规籼稻增加最多;后者平均降低4.7%,常规籼稻降幅最大。结论 FACE处理可显著提高水稻产量和氮素吸收利用效率,但品种间差异较大。     

东北三省大豆种质品质性状鉴评与综合分析

根据目标性状有的放矢的选配杂交亲本是提高优异品质组成品种的选择效率的基本前提。本研究对东北三省102份大豆种质资源的蛋白、氨基酸组分、油份及脂肪酸组分进行测定,通过遗传多样性、主成分和聚类分析,对其进行表型鉴定及基因型分类以综合评价种质品质特性。结果表明:东北三省大豆种质油份及脂肪酸组分变异较丰富,遗传多样性程度较高。根据主成分分析筛选到9个主成分进行聚类分析,通过聚类分析将供试种质资源分为5类。第I类群蛋白含量较高、油份含量偏低,第II类群蛋白、油份含量均居中,第III类群油份含量较高、蛋白含量偏低,第IV类群高油,第V类群高蛋白,类群间的氨基酸、脂肪酸组分各有差异。需根据育种目标在群体间选配亲本,以提高品质育种的效率。     

裂脖跳小蜂属(膜翅目:跳小蜂科)1新种及1新记录种记述

记述了裂脖跳小蜂属1新种--韩氏裂脖跳小蜂(Rhopus hanni Zu&Li, sp. nov.),1中国新记录种--硫磺裂脖跳小蜂(Rhopus sulphureus(Westwood,1837))。对新种及新记录种的形态特征和分布进行了详细的描述,并附有成虫特征照片。     

玉米新品种吉圣玉908选育

吉圣玉908是四川省三台县大圣玉米研究所选育的玉米杂交种,适宜在西南山区中海拔地区种植,具有广适、优质、综合抗性好的特点。2015—2016年在四川省区试平均产量为9 245.63kg/hm~2,比对照增产11.45%,2年分别比对照正红311增产11.2%和11.7%;生产试验平均产量9 323.4kg/hm~2,较对照增产10.3%。2018年通过四川省农作物品种审定委员会审定,审定编号为川审玉2018009号。     

Construction and evaluation of introgression lines and fine mapping of ehd8 from Jinghong common wild rice (Oryza rufipogon)

Heading date is one of the most important traits in rice and regulated by multiple genes. Common wild rice is the ancestor of Asian cultivated rice and harbours abundant genetic diversity. To use wild rice resource in rice breeding, a set of 154 introgression lines (ILs) covering 93% of the genome of Jinghong common wild rice was constructed in the background 'Teqing', using 208 simple sequence repeat markers evenly distributed on 12 chromosomes. Among the ILs, the line JIL64 displayed late heading independent of photoperiod. Genetic analysis using the two F₂ populations crossed ''Teqing'/JIL64 and JIL64/'Teqing' revealed that late flowering was controlled by a recessive gene on chromosome 8 (designated early heading date 8, ehd8), and ehd8 was fine mapped to the 50‐kb region flanked by markers RM22221 and 64Indel4. Sequencing and qRT‐PCR demonstrated that LOC_Os08g01410 and LOC_Os08g01420 were deleted in JIL64 and may be associated with the late heading of Jinghong common wild rice. These findings lay a practical foundation for characterizing ehd8, and the ILs help to mine genes from Jinghong common wild rice.     

Evaluation of Particle Size Influence on Proximate Composition,Physicochemical, Techno-Functional and Physio-Functional Properties of Flours Obtained from Persimmon (<Emphasis Type="Italic">Diospyros kaki</Emphasis> Trumb.) Coproducts

The aim of the work was to study the influence of particle size in the composition, physicochemical, techno-functional and physio-functional properties of two flours obtained from persimmon (Diospyros kaki Trumb. cvs. ‘Rojo Brillante’ (RBF) and ‘Triump’ (THF) coproducts. The cultivar (RBF and THF) and particle size significantly affected all parameters under study, although depending on the evaluated property, only one of these effects predominated. Carbohydrates (38.07–46.98 g/100 g) and total dietary fiber (32.07–43.57 g/100 g) were the main components in both flours (RBF and THF). Furthermore, insoluble dietary fiber represented more than 68% of total dietary fiber content. All color properties studied were influenced by cultivar and particle size. For both cultivars, the lower particle size, the higher lightness and hue values. RBF flours showed high values for emulsifying activity (69.33–74.00 mL/mL), while THF presented high values for water holding capacity (WHC: 9.47–12.19 g water/g sample). The bile holding capacity (BHC) and fat/oil binding values were, in general, higher in RBF (19.61–12.19 g bile/g sample and 11.98–9.07, respectively) than THF (16.12–12.40 g bile/g sample and 9.78–7.96, respectively). The effect of particle size was really evident in both WHC and BHC. Due to their dietary fiber content, techno-functional and physio-functional properties, persimmon flours seem to have a good profile to be used as potential functional ingredient.     

优化预处理及脱毒工艺以制备玉米芯半纤维素水解液

为了降低玉米芯半纤维素水解液中的乙酸、糠醛和酚类等有毒物质含量,使可利用糖类含量增加。本研究以玉米芯为原料制备水解液,对预处理及脱毒工艺进行优化,并利用高效液相色谱(HPLC)检测优化效果。结果表明,10~20目的玉米芯在10%氨水浸泡24 h后,可将乙酸和酚类物质的脱除率,分别提高至93.4%和32.3%,而糠醛的含量也大大降低。经过真空浓缩、CaO脱毒以及2%活性炭吸附后,使有毒物质含量再次降低,此时的水解液可完全用于菌株的发酵试验,达到了去除的目的。本文所得到的最佳水解液处理步骤,其结果符合菌株发酵用标准,说明水解液处理方式的不同,直接影响着水解液的制备。这为研究和利用木质纤维素等可再生资源提供了思路,也为发酵生产奠定了理论基础。     

Improvement of ink-jet printing performances using β-cyclodextrin forming inclusion complex on cotton fabric

Cotton fabric was modified with β-cyclodextrin (β-CD) forming inclusion complex to yield color strength, pattern sharpness, and color fastness for ink-jet printing. The modified cotton fabric was confirmed with the presence of new strong absorption peaks around 1713 cm^-1 and 1243 cm^-1 in FT-IR. β-CD had been covalently grafted on cotton fabric via the esterification reaction of citric acid (CTR) with cellulose and β-CD. The results indicated that printing performances of the ink-jet printed fabric were enhanced through β-CD modification. The K/S value was enhanced from 4.21 to 6.72, the width of printed line was decreased from 1.48 mm to 1.25 mm, and the color fastness was improved to 3-4 level. These improvements were due to the truncated cone structure of β-CD, which can form inclusions with water-based pigment. Meanwhile, the crease recovery performance was also improved with the aid of CTR. A comparison between the unmodified and modified cotton fabric suggested that the crease recovery angle of β-CD modified cotton fabric was increased by 25.0 % in the warp direction. Therefore, printing performance and crease recovery performance of β-CD modified and water-based pigment printed cotton fabric were enhanced remarkably.